Mods

Frequently Asked Questions

What version do I use? / What version of Minecraft is this mod for? / Why are your mod version numbers so weird? / I have the latest version of your mod but Minecraft asks for an older version

There’s a nice detailed post about that here.

 

Can I include your mod(s) in a mod pack?

I have a separate page for this question. You can find it here.

 

Do your mods need any other mods?

All of my mods will require Minecraft Forge for the Minecraft version you’re running. My mods will also require iChunUtil, unless stated otherwise. If any other mods are required, it will be stated on the Downloads tab. If a mod requires a specific version of mod installed, Forge will tell you when you try to launch the game.

If you’re looking for requirements of a mod for Minecraft 1.5 and earlier (please don’t), high chances are they may require Risugami’s ModLoader, but will run on Minecraft Forge anyways. These versions may not require iChunUtil.

 

How do I install your mods?

All of my mods are drag-drop into the /mods/ folder, unless stated otherwise on the mod page. The download should be a JAR file (It will be a ZIP file if its for Minecraft 1.6.4 and earlier). Make sure you have all other required mods as well.

 

Where is your mod’s config file? / How do I change something that was mentioned configurable?

The config file for all my mods (except for Tabula, because it has it’s own workspace folder in /mods/tabula/) will be in the /config/ folder of the root (wherever you are launching Minecraft/the Server).

All configs can be edited by your favourite text editor, I use Notepad++. Most of the configs will be either String (text) or Integer (number) configs. Formatting for the String configs are important, please pay attention to the comments!

If you are looking for keybind configs, they are stored in iChunUtil_keybinds.cfg for all my mods. Why? A poll was run and it was decided to keep it in a separate config.

 

Your mod is crashing/has strange behaviour! / I have a suggestion for your mod! What do I do? Can I tell you about it?

First of all, make sure you are using the latest version of the mod. Check the mod page for the latest version. Please note that I drop support of my mod for old Minecraft versions (as in, not the latest modable version of Minecraft that you can get from the launcher).

If you are already using the latest version of the mod, make sure you are not using Optifine. Optifine tends to cause issues with mods and sometimes issues caused go away when it is uninstalled.

If you are sure it’s not Optifine, go to the repository page for the mod (IssueTracker-Mods, if the there is none) and look for the Issues tab. Crash Logs, Issues and Suggestions all go there. Please mention if you are using another third party API other than Minecraft Forge (such as MCPC+ or Sponge, etc) as some issues could be due to their end. If you’re posting to the Github, it’s fine to post the crash log in it’s whole there, but if you’re sending it to me elsewhere, put it up on gist.github.com or pastebin.com.

You can also contact me on IRC if you know where to find me. I don’t generally provide support for my mods anywhere else, and especially not from the comments on this website.

 

Can you please update your mod to X.Y.Z version of Minecraft?

If I have not stated that the mod has been discontinued on the mod page, the mod will eventually (hopefully) be updated to said version of Minecraft, given that the version of Minecraft in question is modable using Minecraft Forge. On occasion I may make the decision to skip a specific Minecraft version, of which if I do, it will also be stated on the mod page.

In the case I retire from modding, my mod(s) which were closed source will be made open source and I will make a clear statement somewhere on my site. Unless I disappear from the internet (which is unlikely),  I will, eventually, try to update all my mods.

If I am busy in real life or demand for a specific mod isn’t great, expect the update for said mod to take a while (or more).

 

Is your mod multiplayer compatible?

All of my recent mods (which use Minecraft Forge) are made to work on Multiplayer. Some mods are clientside only (the info tab will state if it is), which means it will do absolutely nothing on a server. If the mod crashes on a server please let me know, cause that would be a bug!

 

Can I make a video about your mod?

By all means, go ahead! Just make sure you give credit and link back to the site if possible. I’m not saying it’s a must, but I’m kinda saying that it’d be nice that you do.

109 Comments

    • CSSullivanFTW February 22, 2015 12:00 pm  Reply

      IKR I want the morph mod for 1.8 forge

      • LOLWUT247 June 20, 2015 6:38 pm  Reply

        Apparently other youtubers have already used it on 1.8

      • Anonymous June 6, 2016 2:03 am  Reply

        Id refer PG 1.8

        • TheAuthor August 26, 2016 8:11 pm  Reply

          1.8 NOW

    • lolollol August 11, 2015 1:56 am  Reply

      Make a 1.8.7 to :3

    • devin September 4, 2016 2:23 am  Reply

      I want the top one

    • Liberty Hubbard September 17, 2016 10:32 am  Reply

      hello ya i think it should come out for 1.8 PLZ!!!!!!!

    • CrashFoxy December 29, 2016 6:50 am  Reply

      please when is it coming out for 1.8

    • DD July 1, 2017 10:40 am  Reply

      Never But Fuck you

    • Yeetor December 4, 2018 5:12 am  Reply

      we need all of the versions up to 1.13

  1. Cameron Spicer January 23, 2015 3:23 am  Reply

    I want to do a mod review on the Guilt Trip mod, so I decided to install it and iChunUtil 4.1.3 and forge 10.13.2.1284. But it crashes? Can you fix this?

  2. Peppmore January 26, 2015 2:51 am  Reply

    I have a minecraft server for 1.7.10. if i run it with ichunutil it crashes. can somebody help me?

    • OryZen July 7, 2015 5:45 am  Reply

      it real, same thing here

  3. neymar January 28, 2015 7:16 pm  Reply

    béna

  4. H3ro3rine_X February 1, 2015 2:24 am  Reply

    which is the 1.6.4 version?

  5. MrMmmmm February 1, 2015 2:27 am  Reply

    I’v tried a dozen ways to install this morph mod for my kids and after poking around I have found that in the splash screen mod button where installed mods are listed the morph 0.9 is disabled. Do you have a suggestion on how to enable? I know its terrible sentence structure, but meh…. 😀

  6. Camden Richter February 3, 2015 11:00 am  Reply

    My problem is, I tried to install it to my already working forge server, (1.7.10) and I put the newest version into my mods folder, now my server won’t even start. It just crashes.

    • Maya May 5, 2016 9:31 am  Reply

      just delete the mod in your mod folder it will help i did it twice 🙂

  7. Stranger February 4, 2015 1:53 pm  Reply

    Ayy, If you could, make the 0.9.1 a zip too? my mac only likes zip files xD

  8. Random Guy February 5, 2015 6:18 am  Reply

    when I load up MC it say minimum version required is 4.0.0

    • yolo swaggins February 7, 2015 2:14 pm  Reply

      mine too

      • Foxa February 11, 2015 9:46 am  Reply

        Guess what I bet Minecraft Forge is just being a butt because it’s doing it to me too even though I HAVE 4.1.3 WHICH IS HIGHER THAN 4.0.0 SO WHAT THE FREAKING HECK MINECRAFT FORGE!

        • VAPX007 September 29, 2015 8:58 pm  Reply

          Mods and the utility mods they’re married to have to be the correct version for each other not just the latest version. Not everything updates instantaneously in a community like this. There’s an ‘upstream-downstream’ type thing going on.

          Try running Forge 1.7.10….etc …. 1448 alone!

          Then try putting mods into the mods folder:IChunUtil 4.0.0
          Morph-beta 0.9.2

    • Skev March 31, 2015 9:55 pm  Reply

      Just try the most recent version of iChunUtil

      • DaBeast April 10, 2015 9:33 am  Reply

        I did

    • DaBeast April 10, 2015 9:32 am  Reply

      mine too

    • Richard May 4, 2015 5:20 pm  Reply

      Same here

    • Chloe July 12, 2015 2:58 pm  Reply

      Same. IDK WHAT IT MEANS!!!

      • VAPX007 September 29, 2015 8:25 pm  Reply

        It means you didn’t read your error report properly and derped over the important part: Version 4.0.0 of ‘what’.

        The Morph mod needs the Utilities mod by Ichun in order to work. Find version 4.0.0 of the Utilities mod, as your error report advised you was the issue, and put it in your mods folder alongside the Morph mod.

        When all else fails, read the whole sentence.

        I’m posting this only because this was ‘my’ problem too.

  9. jgfgdfgdf February 7, 2015 7:27 am  Reply

    how do i uninstall this mod does anyone know it wont let my minecraft work

    • TheUltraCube May 24, 2015 8:39 pm  Reply

      Just remove the files in your mods folder or the files you put in the minecraft directories to install it. If you are not trolling. Please consider troubleshooting beforehand

  10. Adriana February 10, 2015 7:04 am  Reply

    what is the 1.6.4 version?

  11. Foxa February 11, 2015 9:39 am  Reply

    I ran Minecraft up and it said the minimum requirement for the thing required other than minecraft forge was 4.0.0 and I had that so what do I do?

    • VAPX007 September 29, 2015 9:12 pm  Reply

      Re-read the error without skimming. 4.0.0 of what? Then see if that ‘what’ is on this website.

    • fuck May 26, 2016 10:22 pm  Reply

      i can’t find 4.0.0

  12. farrel February 16, 2015 1:56 pm